Brand và model
Information about the brand, model and mã sản phẩm alias (if any) of a specific device.
Bạn đang xem: Pantech vega iron2 goes official with snapdragon 801 chipset
Brand name of the company that manufactures the device.
Model name of the device.
|Vega Iron 2|
Аlternative names, under which the mã sản phẩm is known.
Information about the dimensions và weight of the device, shown in different measurement units. Toàn thân materials, available colors, certifications.
Information about the width, i.e. The horizontal side of the device when it is used in its standard orientation.
|73.5 mm (millimeters)7.35 centimet (centimeters)0.241 ft (feet)2.894 in (inches)|
Information about the height, i.e. The vertical side of the device when it is used in its standard orientation.
|144.2 milimet (millimeters)14.42 cm (centimeters)0.473 ft (feet)5.677 in (inches)|
Information about the thickness/depth of the device in different measurement units.
|7.9 mm (millimeters)0.79 cm (centimeters)0.026 ft (feet)0.311 in (inches)|
Information about the weight of the device in different measurement units.
|152 g (grams)0.34 lbs (pounds)5.36 oz (ounces)|
Estimated volume of the device, calculated from the dimensions provided by the manufacturer. Applies for devices in the form of a rectangular parallelepiped.
|83.73 cm³ (cubic centimeters)5.08 in³ (cubic inches)|
Information about the colors, in which the device is available in the market.
The Subscriber Identity Module (SIM) is used in thiết bị di động devices for storing data authenticating the subscribers of thiết bị di động services.
|Number of SIM cards|
Information about the number of SIM cards, supported by the device.
A thiết bị di động (cellular) network is a radio system, which allows a large number of smartphone devices khổng lồ communicate with each other.
GSM (Global System for smartphone Communications) was developed to replace the analog cellular network (1G), therefore it is referred to as a 2G mobile network. It has been improved with the addition of General Packet Radio Services (GPRS) and later via the Enhanced Data rates for GSM Evolution (EDGE) technology.
|GSM 900 MHzGSM 1800 MHzGSM 1900 MHz|
UMTS stands for Universal di động Telecommunications System. Based on the GSM standard, it is deemed as a 3G di động network standard. It has been developed by the 3GPP and its major advantage is the provision of greater bandwidth and spectral efficiency, due lớn the W-CDMA technology.
|UMTS 1900 MHzUMTS 2100 MHz|
LTE is deemed to lớn be the fourth generation (4G) of mobile communications technology. It has been developed by the 3GPP based on the GSM/EDGE và UMTS/HSPA technologies in order lớn increase the speed and capacity of wireless data networks. A further development of the technology is called LTE Advanced.
|LTE 1800 MHzLTE 2100 MHzLTE 2600 MHzLTE 850 MHz (IM-A910L; IM-A910S)LTE 900 MHz (IM-A910K)|
Mobile network technologies & bandwidth
Communication between devices within mobile networks is realized via various generations of network technologies, which provide different bandwidth.
|Mobile network technologies|
There are several network technologies that enhance the performance of sản phẩm điện thoại networks mainly by increased data bandwidth. Information about the communication technologies supported by the device & their respective uplink và downlink bandwidth.
|UMTS (384 kbit/s )EDGE Class 12 (118.4 kbit/s , 192-296 kbit/s )GPRS Class 12 (32-48 kbit/s , 32-48 kbit/s )HSPA+LTE cát 4 (51.0 Mbit/s , 150.8 Mbit/s )LTE-A (500 Mbit/s , 1 Gbit/s )|
Operating system is the system software, which manages and controls the functioning of the hardware components of the device.
|Operating system (OS)|
Information about the operating system used by the device as well as its version.
|Android 4.4.2 KitKat|
System on chip (SoC)
A system on a cpu (SoC) includes into a single chip some of the main hardware components of the điện thoại device.
The SoC integrates different hardware components such as the CPU, GPU, memory, peripherals, interfaces, etc., as well as software for their functioning.
|Qualcomm Snapdragon 801 MSM8974AB v3|
Information about the process technology used in manufacturing the chip. The value in nanometers represents half the distance between elements that cosplay the CPU.
|28 nm (nanometers)|
CPU is the Central Processing Unit or the processor of a di động device. Its main function is khổng lồ interpret và execute instructions contained in software applications.
The CPU bits are determined by the bit-size of the processor registers, address buses and data buses. 64-bit CPUs provide better performance than 32-bit ones, which on their part perform better than 16-bit processors.
The instruction set architecture (ISA) is a mix of commands used by the software lớn manage the CPU"s work. Information about the set of instructions the processor can execute.
|Level 0 cache memory (L0)|
Some processors have a cấp độ 0 cache memory, which is accessed quicker than the L1, L2, L3, & so one cache memories. Besides achieving better performance, it also consumes less power.
|4 KB + 4 KB (kilobytes)|
|Level 1 cache memory (L1)|
The cache memory is used by the processor in order khổng lồ shorten the time needed khổng lồ access data & instructions that a frequently used. The L1 (level 1) cache memory has a small volume, but operates faster than the RAM và the rest cache memory levels. If the processor does not find the data needed in L1, it continues khổng lồ look for it in the L2 cache memory. In some processors the search in L1 & L2 is simultaneous.
|16 KB + 16 KB (kilobytes)|
|Level 2 cache memory (L2)|
The L2 (level 2) cache memory is slower than L1, but has a larger capacity, instead, which allows it to lớn cache more data. Just lượt thích L1, it is much faster than the system memory (RAM). If the CPU does not find the data needed in L2, it proceeds to look for them in the L3 cache memory (if there is such) or in the RAM.
|2048 KB (kilobytes)2 MB (megabytes)|
A CPU bộ vi xử lý core is the processor unit, which executes software instructions. Presently, besides single-core processors, there are dual-core, quad-core, hexa-core và so on multi-core processors. They increase the performance of the device allowing the execution of multiple instructions in parallel.
The frequency of the processor describes its clock rate in cycles per second. It is measured in Megahertz (MHz) or Gigahertz (GHz).
|2300 MHz (megahertz)|
GPU is a graphical processing unit, which handles computation for 2D/3D graphics applications. In di động devices GPU is usually utilized by games, UI, đoạn phim playback, etc. GPU can also perform computation in applications traditionally handled by the CPU.
|Qualcomm Adreno 330|
Similar lớn the CPU, the GPU consists of processing units called cores. They handle the computation of graphics in various applications.
The frequency is the clock rate of the graphic processor (GPU), which is measured in Megahertz (MHz) or Gigahertz (GHz).
|578 MHz (megahertz)|
RAM (Random-Access Memory) is used by the operating system and all installed applications. Data in the RAM is lost after the device is turned off or restarted.
|3 GB (gigabytes)|
Information about the type of RAM used by the device.
Information about the number of RAM channels integrated in the SoC. More channels mean higher data transfer rates.
RAM frequency relates directly to the rate of reading/writing from/in the RAM memory.
|933 MHz (megahertz)|
Every điện thoại device has a built-in storage (internal memory) with a fixed capacity.
Information about the capacity of the built-in storage of the device. Sometimes one và the same model may is offered in variants with different internal storage capacity.
|16 GB (gigabytes)32 GB (gigabytes)|
Memory cards are used in mobile devices for expanding their external storage capacity.
The various types of memory cards are characterized by different sizes and capacity. Information about the supported types of memory cards.
The display of a di động device is characterized by its technology, resolution, pixel density, diagonal length, màu sắc depth, etc.
One of the main characteristics of the display is its type/technology, on which depends its performance.
In điện thoại devices display kích thước is represented by the length of its diagonal measured in inches.
|5.3 in (inches)134.62 mm (millimeters)13.46 centimet (centimeters)|
Approximate width of the display
|2.6 in (inches)66 mm (millimeters)6.6 cm (centimeters)|
Approximate height of the display
|4.62 in (inches)117.33 milimet (millimeters)11.73 centimet (centimeters)|
The ratio between the long & the short side of the display
The display resolution shows the number of pixels on the horizontal & vertical side of the screen. The higher the resolution is, the greater the detail of the displayed content.
|1080 x 1920 pixels|
Information about the number of pixels per centimeter (ppcm) or per inch (ppi) of the display. The higher the pixel density, the more detailed & clearer is the information displayed on the screen.
|416 ppi (pixels per inch)163 ppcm (pixels per centimeter)|
The color depth of the display is also known as bit depth. It shows the number of bits used for the color components of one pixel. Information about the maximum number of colors the screen can display.
|24 bit16777216 colors|
The estimated percentage of the screen area from the device"s front area.
|73.3 % (percent)|
Information about other functions and features of the display.
Different sensors measure different physical quantities & convert them into signals recognizable by the điện thoại device.
Sensors vary in type & purpose. They increase the overall functionality of the device, in which they are integrated.
The primary camera of the mobile device is usually placed on its back và can be combined with one or more additional cameras.
Information about the sensor type of the camera. Some of the most widely used types of image sensors on thiết bị di động devices are CMOS, BSI, ISOCELL, etc.
|CMOS (complementary metal-oxide semiconductor)|
The rear cameras of di động devices use mainly a LED flash. It may arrive in a single, dual- or multi-light setup and in different arrangements.
One of the main characteristics of the cameras is their image resolution. It states the number of pixels on the horizontal and vertical dimensions of the image, which can also be shown in megapixels that indicate the approximate number of pixels in millions.
|4160 x 3120 pixels12.98 MP (megapixels)|
Information about the maximum resolution at which the rear camera can shoot videos.
|3840 x 2160 pixels8.29 MP (megapixels)|
Information about the maximum number of frames per second (fps) supported by the rear camera while recording video at the maximum resolution. Some of the main standard frame rates for recording và playing video are 24 fps, 25 fps, 30 fps, 60 fps.
|30 fps (frames per second)|
Information about additional software & hardware features of the rear camera which improve its overall performance.
|AutofocusOptical image stabilizationGeotaggingTouch focusFace detectionWhite balance settingsISO settingsScene mode|
Modern smartphones have one or more front cameras và their positioning has led lớn various thiết kế concepts – pop-up camera, rotating camera, notch, punch hole, under-display camera, etc.
Information about the number of pixels on the horizontal và vertical dimensions of the photos taken by the front camera, indicated in megapixels as well.
|1920 x 1080 pixels2.07 MP (megapixels)|
Information about the maximum resolution of the videos shot by the front camera.
|1920 x 1080 pixels2.07 MP (megapixels)|
Digital cameras are able khổng lồ shoot videos at different frames per second (fps). Some of the main standard frame rates for recording & playing đoạn clip are 24 fps, 25 fps, 30 fps, 60 fps. Information about the maximum possible fps for shooting videos at the maximum possible resolution.
|30 fps (frames per second)|
Information about the type of speakers and the audio technologies supported by the device.
The loudspeaker is a device, which reproduces various sounds such as ring tones, alarms, music, voice calls, etc. Information about the type of speakers the device uses.
The radio in a thiết bị di động device is a built-in FM radio receiver.
Information whether the device has an FM radio receiver or not.
Information about the positioning and navigation technologies supported by the device.
The tracking/positioning service is provided by various satellite navigation systems, which track the autonomous geo-spatial positioning of the device that supports them. The most common satellite navigation systems are the GPS & the GLONASS. There are also non-satellite technologies for locating mobile devices such as the Enhanced Observed Time Difference, Enhanced 911, GSM Cell ID.
Wi-Fi is a công nghệ that provides wireless data connections between various devices within a short range.
Wi-Fi communication between devices is realized via the IEEE 802.11 standards. Some devices have the possibility khổng lồ serve as Wi-Fi Hotspots by providing internet access for other nearby devices. Wi-Fi Direct (Wi-Fi P2P) is another useful standard that allows devices khổng lồ communicate with each other without the need for wireless access point (WAP).
|802.11a (IEEE 802.11a-1999)802.11b (IEEE 802.11b-1999)802.11g (IEEE 802.11g-2003)802.11n (IEEE 802.11n-2009)802.11ac (IEEE 802.11ac)Wi-Fi HotspotWi-Fi Direct|
Bluetooth is a standard for secure wireless data transfer between different types of devices over short distances.
The technology has several versions, which improve the connection speed, range, connectivity and discoverability of the devices. Information about the công nghệ bluetooth không dây version of the device.
Bluetooth uses various profiles và protocols related to faster exchange of data, energy saving, better device discoverability, etc. Some of those supported by the device are listed here.
|A2DP (Advanced Audio Distribution Profile)LE (Low Energy)|
The Universal Serial Bus (USB) is an industry standard that allows different electronic devices khổng lồ exchange data.
There are several USB connector types: the Standard one, the Mini và Micro connectors, On-The-Go connectors, etc. Type of the USB connector used by the device.
There are several versions of the Universal Serial Bus (USB) standard: USB 1.0 (1996), the USB 2.0 (2000), the USB 3.0 (2008), etc. With each following version the rate of data transfer is increased.
Тhe USB interface in smartphone devices may be used for different purposes such as battery charging, using the device as a mass storage, host, etc.
The High-Definition Multimedia Interface (HDMI) is considered to lớn be the digital alternative of the analog audio/video interface standards.
This audio/video interface is used in transferring uncompressed video clip and audio data between HDMI-compatible devices. Often mobile devices are connected to lớn an HDMI device via an MHL adapter.
|Micro USB to HDMI MHL adapter|
The tai nghe jack is an audio phone connector, a.k.a. An audio jack. The most widely used one in di động devices is the 3.5 mm tai nghe jack.
Information whether the device is equipped with a 3.5 mm audio jack.
Information about other important connectivity technologies supported by the devices.
Information about some of the most widely used connectivity technologies supported by the device.
|Computer syncOTA syncTetheringDLNANFCUPnP|
A web browser is a software application for accessing, fetching, displaying and navigating through information on the World Wide Web.
Information about some of the features và standards supported by the browser of the device.
Audio tệp tin formats/codecs
Mobile devices tư vấn various audio tệp tin formats và codecs, which respectively store & code/decode digital audio data.
|Audio tệp tin formats/codecs|
List of some of the most common audio file formats and codecs supported standardly by the device.
|eAAC+ / aacPlus v2 / HE-AAC v2MP3 (MPEG-2 Audio Layer II, .mp3)WMA (Windows truyền thông media Audio, .wma)WAV (Waveform Audio tệp tin Format, .wav, .wave)|
Video file formats/codecs
Mobile devices support various video file formats và codecs, which respectively store & code/decode digital đoạn clip data.
|Video file formats/codecs|
List of some of the most common đoạn clip file formats & codecs supported standardly by the device.
|3GPP (3rd Generation Partnership Project, .3gp)H.263H.264 / MPEG-4 Part 10 / AVC videoMP4 (MPEG-4 Part 14, .mp4, .m4a, .m4p, .m4b, .m4r, .m4v)|
The batteries of mobile devices differ in capacity & technology. They provide the electrical charge needed for the functioning of the devices.
The capacity of a battery shows the maximum charge, which it can store, measured in mili-Ampere hours.
|3220 mAh (milliampere-hours)|
The battery type is determined by its structure & more specifically, by the chemicals used in it. There are different battery types & some of the most commonly used in di động devices are the lithium-ion (Li-Ion) and the lithium-ion polymer battery (Li-Polymer).
|2G talk time|
2G talk time is the time period a battery charge will last, if one is constantly talking on the phone in a 2G cellular network.
|22 h (hours)1320 min (minutes)0.9 days|
|2G stand-by time|
2G stand-by time is the longest time a battery charge will last, if the device is not used but is constantly connected khổng lồ the 2G cellular network.
|703 h (hours)42180 min (minutes)29.3 days|
|3G talk time|
3G talk time is the time period a battery charge will last, if one is constantly talking on the phone in a 3G cellular network.
|22 h (hours)1320 min (minutes)0.9 days|
|3G stand-by time|
3G stand-by time is the longest time a battery charge will last, if the device is not used but is constantly connected lớn the 3G thiết bị di động network.
|703 h (hours)42180 min (minutes)29.3 days|
Information about some additional features of the device"s battery.
Điều khoản - Bảo Mật https://atochi.vn/ghe-massage.html