Free client software for hikvision devices

IMPORTANT! This mã sản phẩm requires non-standard firmware. Vày Not Install standard firmware (e.g. V.4.1.xx) on this model. Doing so will permanently damage your system. You maryannations88.comt aryannations88.come caryannations88.comtom firmware v.4.1.25 from the iDS-9632NXI-I8/16S sản phẩm page.

View the most updated version of this document here:

https://techsupportca.freshdesk.com/en/support/solutions/articles/17000113531-i-series-nvr-firmware-upgrade-instructions

The I-series NVR (such as the DS-7716NI-I4) is one of aryannations88.com"s most popular và feature-rich recorders. As such, many firmware revisions have been introduced over the years khổng lồ continually ensure the sản phẩm is compatible with the newest technology available. Due to lớn the many revisions, we recommend that the aryannations88.comer closely follows the instructions below in order to reduce the amount of time spent as well as the chance of failure.

Database Optimization & Repair

As more affordable IP cameras are introduced over time with greater đoạn phim resolution and data sizes, more efficient database management also becomes necessary. The introduction of firmware v4.0 brought about a new database architecture in order lớn be futureproof.

After upgrading to v4.X, the recorder database will need lớn be converted & optimized. If you are experiencing issues where playback is expected but not found, make sure "Database Repair" is performed as indicated in the procedures và scenarios below.

Preparing the Upgrade

Before proceeding with upgrade, it is recommended that NVR configuration file is exported from the NVR over the network or on lớn a local aryannations88.comB drive.

Upgrading from v3.4.92 build 170518 or Older

Upgrading from Any v4.X Build to v4.50.00.

Downgrading

Downgrading is not recommended. Due khổng lồ new features & parameters constantly being added, downgrading may caaryannations88.come the NVR khổng lồ factory default itself or require a manual mặc định to operate properly.

View the most updated version of this document here:K-Series DVR nâng cấp instructionThe Turbo 4 Hybrid DVR K series has multiple models and across different platform và chipset. It also has similar firmware development of other recording sản phẩm line; DVR K series has also introduced the GUI4.0 lớn ensure the series khổng lồ be compatible lớn the newest công nghệ available. The new database architecture is also brought into the DVR firmware v4.0 khổng lồ be future proof and for better recording tìm kiếm experience.  

Database Optimization và Repair

As more affordable cameras introduced over time with greater đoạn phim resolution and data sizes, more efficient database management also becomes necessary. The introduction of firmware v4.0 brought about a new database architecture in order lớn be futureproof.After upgrading lớn v4.X, the recorder database will need khổng lồ be converted and optimize. If you are experiencing issues, where playback is expected but not found, please make sure to lớn perform "Database Rebuild" as indicated in the procedures & scenarios below. 

Preparing the Upgrade

Before proceeding with upgrade, it is recommend exporting DVR configuration file from the DVR over the network or on to lớn a local aryannations88.comB drive.

Action after firmware upgraded 

1. Nâng cấp the DVR according lớn the chart above. 

2. Reconfirming Channel"s Recording Schedule 

- Confirm channel"s recording schedule is enable. 

- kiểm tra if the channel is on correct recording schedule.

3. Double check Storage Setting

- Make sure all channel are assigned to lớn record on its HDD group when the Storage setting is under Group Mode. 

4. Perform Database Rebuild locally. 

• Some version above support Database Rebuild via web access - K51 and K72

• Perform Database Rebuild regardless if system is having any database issue symptom. 

• Database Rebuild process is average ~30 khổng lồ 60min per TB. The process may still varies depends recording data.

• After Database Rebuild - kiểm tra log lớn confirm Database Rebuild has went thru properly. 

• If Database Rebuild Started and Stopped log has been log only within few minutes. Database rebuild may not has been completed properly. It is strongly recommend performing the Database Rebuild again.

• To kiểm tra log > System > Log > Information > Database Rebuild Started & Stopped.

• If the log option is not available - access system via SSH can also obtain similar result.

5. Recording Data is still missing after database rebuild process. 

If the data has not been recorded or has been overwritten, Database rebuild process is not able retrieve those lost data. Have the system upgraded to the latest available firmware version above to prevent any future data lost is strongly recommended for all application.

In light of the global semiconductor shortage, aryannations88.com has made some hardware changes to lớn the DS-76xxNI-Q1(2)/P NVRs, also known as “Q series.”

These changes vị not have any effect on the performance, specifications, or the aryannations88.comer interface of the NVRs. For the ease of reference, these modified units are known as “C-Version” units. This is clearly indicated on the NVR label and on the box by the serial number.

The only difference between the “C-Version” and “non-C-Version” is the firmware. The firmware is not interchangeable: